| 1. | To enhance the surface smoothness and gloss of products
提升制品表面平整度及光泽度。 |
| 2. | According to the measurement of the elements , it is shown that the surface smoothness , profile fidelity and steep sidewall are very well
通过对刻蚀出的元件的检测发现，元件的表面光洁度、轮廓保真度和侧壁陡峭度都非常好。 |
| 3. | Papers can be clay coated for surface smoothness and opacity giving high quality finishes suitable for high quality printing processes
要得到适于高质量印刷工艺的高品质加工纸，为了表面平滑度和不透明度的需要，纸上可能涂布白土。 |
| 4. | The adoption of fine aggregates can reduce the separation of aggregates and improve the compactness and surface smoothness of concrete of the sidewall
配合比中用小区料作骨料，能减少骨料分离，提高边墙混凝土密实性及表面平整度。 |
| 5. | The items of the quality testing were included the viscosity of recycling asphalt , asphalt content of reclaimed asphalt concrete materials , compaction , surface smoothness and placement temperature
再生沥青混凝土质量检验项目包括再生沥青的黏? 、刨除?含油? 、压实? 、 ?面平坦?与施工温?等。 |
| 6. | The cavitation doesn " t appear on the front of aeration - baffle under the conditions that the aeration - baffle surface smoothness is controlled and that a lot of air is supplied from the back of the aeration - baffle
在控制墩头边壁不平整度及墩后大气充分供应条件下，墩头在试验范围内不产生空蚀。 |
| 7. | Weifen shek series of quality products , fully promote , not pollution , and natural stone than physical quality permanent stability , more naisuanjian corrosion , not faded , not deformation , surface smoothness of 70 %
微粉石系列产品内质完全玻化，不易污染，与天然石相比，理化品质恒久稳定，更耐酸碱腐蚀，不褪色，不变形，表面光洁度达70以上。 |
| 8. | The experimental results show that the excimer laser refractive system is characteristic of short cure time , high accuracy , surface smoothness and easy to integrate the wavefront aberration technology
实验结果表明，该矫正系统具有治疗时间短、矫正精度高、角膜切削表面光滑，易于集成波前像差技术实现“个体化切削”方案等优点，具有较好的临床应用前景。 |
| 9. | In the section of fabricating technology , i first discuss the ion beam technology . through the analysis of the effects of each parameter on the surface smoothness , profile fidelity and linewidth resolution in the process of ion etching , the suitable angle of incident ion beam , ion energy , density of ion beam and time of etching are selected combining the actual status of the mask
在制作工艺的研究方面，首先研究了离子束刻蚀技术，通过对离子束刻蚀过程中各个参数对刻蚀元件的表面光洁度、轮廓保真度和线宽分辨的影响分析，结合掩膜的实际情况选择出了合适的离子束入射角、离子能量、束流密度和刻蚀时间等参数。 |
